Products

Sealants - CURIL T2

Curil T2 is a permanently plastic, solvent-free sealant with excellent adhesion to sealing surfaces. As it contains no solvents, no flash-off time is required.

Due to its thermal and chemical resistance, it is particularly suitable as a universal sealant for demanding sealing joints and applications for easy disassembly. Curil T2 is characterized by very good adhesion to the sealing surface.

General product information:
- Chemical base: Polyurethane
- Curing: None
- Components: Single-component
- Color: Green
- Consistency: High viscosity
- Temperature range: -55°C to +250°C (up to +270°C over 24h)
- Maximum sealing gap: 0.2 mm
- pH value: Neutral
- Solubility: Easily soluble

- Resistance to: Mineral oils (also with additives), synthetic oils, lubricating greases, coolants, cold and hot water, salt water, cleaning agents, weak acids and alkalis, fuel

- Possible areas of application: Sealing cap, oil pan, water and oil pump, differential housing, transmission housing, thermostat housing, control housing, axle cover, flange connection

I. A. all applications for easy disassembly. 

General properties:
- Viscosity: 100,000 - 112,000 m/Pas (Brookfield spindle)
- Density: 1.08 +/- 0.1 g/cm3 DIN 53479
- Skin formation/bleed time: Not applicable
- Tensile strength: 0.034 N/mm2 

Storage:
- Optimum storage conditions: cool (+5°C to +25°C) and dry
- Shelf life: 36 months in unopened containers, opened containers should be stored in a dry place.

Further downloads, documentation available on request
Source: ihb