Portable induction heater - SKF TMBH 1 Scorpio - up to 5kg
This device / tool is no longer in the manufacturer's range - just ask our customer service for a suitable replacement / successor model - than you very much indeed !
The SKF bearing heater TMBH 1 is a portable lightweight heater for heating bearings with an inner diameter ranging from 20 to 100 mm (0.8 to 4 in) and a maximum corresponding weight of 4,5 kg (10 lb). The heater uses a patented method of heating based on high frequency induction, which provides optimised efficiency.
This method is very quiet and creates no magnetisation at all. In addition to bearings, the heater can also be used for heating ferrous components such as gears, pulleys, bushings and shrink rings.
- Lightweight and portable (4,5 kg – 10 lbs)
- Heating efficiency better than 85%
- Components are not magnetised
- Equipped with temperature and time control
- Supplied with a heating clamp, temperature probe, power cable, heat resistant gloves and a carrying case
Further downloads, documentation available on request
Source: SKF
webshop: http://shop.ihb.ch
youtube: https://youtu.be/_sErQq0CRfU